PRODUCT OVERVIEW
The Kreg Rip-Cut™
turns your circular saw into a precision edge-guided cutting tool that makes
straight, accurate, repeatable cuts in plywood, MDF and other large sheets.
With the Rip-Cut™, you can cut with the confidence you want and the precision
you need. The Rip-Cut™ easily makes straight, accurate, repeatable cuts without
measuring, marking or having to keep the saw on the cut line. The Rip-Cut™ does
this with a long edge guide that follows the straight edge of the sheet you are
cutting. So, all you have to do is lock the saw in at the measurement you want
up to 24 in using the built-in measuring scale and then make your cut. With a
built-in measuring scale, you don't have to measure and mark each cut, either.
Just lock the saw sled at your desired cut width and you're all set, whether
you need to cut one piece or make multiple pieces of the exact same size. Plus,
the Rip-Cut™ makes it easier to cut down large sheets by yourself. The Rip-Cut™
is very easy to use. Simply mount your saw to the universal sled it accepts most
left-blade or right-blade saws and then slide the sled onto the aluminum rail.
After a simple one-time calibration, you can lock in your cut width (up to 24
in) using the measuring scale and precision cursor. Then, just hold the edge
guide against the edge of your sheet as you guide the saw. You'll get straight,
accurate, repeatable cuts easily every time.
Descripción
español:
RIEL PARA SIERRA
CIRCULAR DE ALUMINIO DE 60,96 CM
Product Details
Color:Blue/Silver
Includes:(1)
Aluminum Guide Rail (1) Precision Edge Guide (1) Universal Saw Sled
Material:Aluminum/Plastic
Specifications:30
in L x 3 in W Aluminum Rail 24 in W Cut
Features
Make rip cuts and
crosscuts up to 24 in wide
Cut multiple pieces
to the same size with just one setup
Use the oversize
edge guide for precise control throughout the cut
Eliminate need for
marking, measuring and layout lines
Universal sled
accepts most circular saws left or right blade
Reversible edge
guide for left or right handed use